Hero contains a Measure Utility Mode that enables users to quickly check Measurements, Perimeters & Areas on the model
Enter Measure Mode by clicking the Measure button on the Left Toolbar or the ⌨ Q keyboard shortcut.
Measure mode has three Sub-Modes:
Length
Perimeter
Area
Which can be toggled in the Guide box or by using the keyboard shortcut ⌨ Tilde `
The Length Sub-Mode will show the dimensions of a line draw by 🖱 Left-Clicking on the plan.
The Perimeter Sub-Mode will show the length of a polyline such that you can trace a perimeter around a building or zone as required. 🖱 click back on the original or 🖱 Double Left-Click to finish the measurement.
Finally the Area Sub-Mode will area in square metres of the drawn polygon. Draw the polygon out similar to the Perimeter Sub-Mode.
For all these Sub-Modes, 🖱 Right-Click removes points & holding ⌨ Shift draws straight lines as in the other drawing modes.