| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
...
To Draw a Special special Floating Wall including Split or Overhead or Floating or internal thermal mass walls Internal Thermal Mass Walls you use the new New Wall button in the left toolbar Left Toolbar or the keyboard shortcut '⌨ N'
Special Floating Walls needs to begin within a zonetheir parent Zone, where they finish is not important. Regardless of where they are moved to, a special wall Special Wall always remains a part of the original parent zoneZone.
The first click 🖱 Left-Click will be the left edge of the wall Wall considering the wall facing outwards, and the second click
The second 🖱 Left-Click finishes the wallWall.
Hold shift ⌨ Shift for straight lines, or right
🖱 Right-Click to reset points, or enter manual wall Manual Wall length by typing, as per the other drawing modes.Drawing Modes.
Floating Wall Parent Zone
| Info |
|---|
Floating Walls need to be started & created within the Parent Zone that they are to be modelled within. The first 🖱 Remember, you can determine the Parent Zone of a Wall using the Group By toggle-buttons in the Wall Data-Grid. |
Floating Wall Direction
| Note |
|---|
Remember Floating Walls are drawn from Left to Right in a facing outwards direction (i.e. to the exterior). A Floating Wall with an External Adjacency requires the correct Orientation for accurate modelling. You can check the Orientation of a Floating Wall with the Orientation Column of the Wall Data-Grid. |
...