Page Comparison

·         Types – Windows, Doors, Permanents, Opaque Louvres

·         Openings in the Vizi

·         Creating (Draw vid)

·         Selecting…selecting parents, selecting openings on top of each other

·         Deleting

·         Splitting

·         Moving, resizing

·         Openings on Floating Walls

·         Openings in the DG

·         Type

·         Spec

·         Orient

·         Width

·         Heights

·         Opening Style & Openability

·         Weatherstripped

·         Insect Screens

·         Frame Colour

·         Coverings internal/external

·         Windows in the Library (link to Window Library)

...

Overview

Openings refer to several types of Wall Openings including Windows, Doors (including Opaque Louvres) & Permanent Openings within the Hero Model. Their properties are different depending on their type.

Windows

Windows are used to represent all non-opaque Openings, this includes standard Windows as well as the Glazed portion of a Glazed Doors unless the glazing portion is <25% of the Opening’s Area (as per NatHERS Technical Note guidance).

Doors

Doors are used to represent Opaque Openings including standard Doors but also Opaque Louvres.

Permanent Openings

A Permanent Opening is used to model a permanent connection between two Zones such as an Open Hallway between a Kitchen Zone and a Hallway Zone.

Openings & Screens, Eave & Wing-Walls

All Openings on External Walls have the Screen, Eaves & Wing-Walls of their Parent Walls applied to them automatically within Simulation.

Openings on Floating Walls

Openings can be added to Floating Walls as per standard Walls.

...

Openings with the Visual-View

Creating

Openings are created using the Opening Draw Mode

...

Selecting

You can Select an Opening either within the Visual View or the Data-Grid.

Openings also share the common context-menu actions of Select Parent (which will select the Parent Wall of the Opening) which can also be called by 🖱 Double Left-Clicking the Opening.

The Send to Back feature can also be very useful for Openings particularly when multiple Openings are aligned over the top of one another, so that you can select the desired Opening. Select the Opening on top and choose the 🖱 Right-Click Context Menu -> Send To Back feature and the previously selected Opening on top will now be below any other Openings. You can now select the Opening on top.

...

Deleting Openings

Openings can be deleted by:

• selecting the Opening within the Visual-View or Data-Grid and pressing ⌨ Delete; or

• by using the 🖱 Right-Click Context-menu Delete action within the Visual View

...

Moving Openings

Openings can be moved in the Visual View by selecting them and then 🖱 Dragging them into their position.

You can also 🖱 Drag the corner Points of an Opening to extend or shrink the Width of the Opening.

...

Splitting

Openings can be split using the Split & Merge Drawing Mode

...

Openings within the Data-Grid

Property	Description	Edited Within
Name	The Name of the Opening. The Opening’s Name is numerically incremented during creation (e.g. from W01 to W02 to W03) and so it can be useful to create Openings based on their Window Schedule tag (if available) so you do not need to rename the Openings.	Opening Data-Grid Name Column
Type	The Type of the Opening: Window, Door or Permanent	Type Column
Specification	Windows & Doors only The Specification of the Window or Door. Window Specification The available Window Specifications within the Opening Data-Grid Specification Column is based on the Window Library Selected Windows List. Door Specification There a variety of Door Specifications available within Hero including standard timber, insulated, metal & insulated metal Doors as well as two Opaque Louvres specifications. Expand title NatHERS Technical Note Guidance on Window Specification 8.2 “When modelling windows or glazed doors, assessors must use either: • The Australian Fenestration Rating Council (AFRC) custom window codes corresponding to the windows specified on the design documentation; or • Default windows.” 8.3 “If a custom window is specified on the design documentation that is not available in the NatHERS custom window library, assessors must model: • a default window with the specified opening type; or • an available custom window that meets all of the following parameters: - identical opening type (e.g. fixed, awning, casement, sliding) to the window specified on the documentation; and - a total window system U-value equal to, or greater than, the window specified on the documentation (e.g. if the U-value of the specified custom window is 3.0, the modelled window selected could be 3.5); and - a total window system Solar Heat Gain Coefficient (SHGC) +/-5% of the window specified on the documentation.” 8.4 “When using default windows, clear glass must be used in lieu of obscure glass (for instance, in a bathroom or WC).” 8.5 “In the absence of obscure glass in the custom windows library, assessors must model either: • The clear window from the same range of custom windows that are being used (i.e. the same supplier, same frame type and frame material); or • A default clear window.”	Specification Column
Orientation	The Orientation of the Opening (i.e. it’s normal direction or direction it is facing)	Not Editable
Width	The Width of the Opening (in mm)	Visual View & Width Column
Left Offset	The Distance from the Left Edge of the Parent Wall to the Left Edge of the Opening (in mm)	Visual View & Left Offset Column (hidden by Default)
Total Height	The Total Height of the Opening (in mm). (I.e. Head Height - Sill Height)	Total Height Column
Head Height	The Head/Top Height of the Opening (in mm) above the Level’s Reference Height	Head Height Column
Sill Height	The Sill/Bottom Height of the Opening (in mm) above the Level’s Reference Height	Sill Height Column (hidden by Default)
Opening Style	Windows Only The Opening Style of the Window (e.g. Casement, Louvre, Awning etc). Changing the Opening Style will typically update the Openable Percentage of the Window	Opening Style Column
Openable Percentage	The Percentage of the Opening’s Area that is Openable for Ventilation as per NatHERS Technical Note Guidance Expand title NatHERS Technical Note Guidance on Openable % 8.6: “When using custom windows, assessors must use the manufacturer’s ventilation charts to determine the openable percentage of the window and/or door. If this information is not available, apply the provisional opening percentage in Table 5. These reflect the area of window that can open and deducts a percentage for the window frame.” 8.7 “When using default windows, assessors must apply the provisional opening percentage figures in Table 5. These reflect the area of window that can open and deducts a percentage for the window frame.” 8.8 “Assessors must use their judgement in applying opening percentages to default or custom windows that have complex opening arrangements and/or are made of different window types.” 8.9 “Assessors must adjust opening percentages to windows with restricted opening safety requirements and no complying security screen. If the restricted opening percentage is not specified on the design documentation, assessors must use the provisional opening percentage of 10% for all window types.” Image Added	Openable Column
Weatherstripped	External Windows & Doors only Whether the Window or Door has Weatherstripping or Draught-proofing specified to signficantly reduce air-leakage.	Weatherstripped Column
Insect Screen	External Windows & Doors only Whether the Window or Door is fitted within fixed Insect Screens. Insect Screens within a Chenath Simulation reduce Ventilation rates through Openings but do not effect modelled Solar Heat Gains or Heat Transfer.	Insect Screen Column
Frame External Colour	External Windows & Doors only The External Colour (and Solar Absorptance) of the Window or Door Frame	External Colour Column
Internal Shade	Windows only The Internal Shade device for the Window as specified & noted on the Plans, and it’s effective R-Value, Solar Transmittance (ST) & Solar Absorptance (SA)	Internal Shade Column
External Shade	Windows only The External Shade device for the Window as specified & noted on the Plans, and it’s effective Shading Coefficient (SC)	External Shade Column

...

Window Library

The Window Library holds the complete library of all Window Specifications available for NatHERS Simulation. The Selected Windows list within the Library is what is presented to Users within the Opening Data-Grid’s Specification column.