...
Within most Energy-Modelling programs including Hero, simulated spaces are defined & organised into Zones.
These Zones typically represents “Rooms” of a Building however they are more accurately described as any Space or Volume of Air that should be is independently modelled. In addition to normal “Rooms” such as Bedrooms & Kitchen within Hero there are a variety of Special Zones within Hero such as Roofspace Zones & Subfloor Zones (detailed below).
Info |
---|
Modelled Zone Coverage All Rooms within a Dwelling should be modelled as Zones including Class 10a Garages attached to the rest of the modelled Dwelling. (Note if unconditioned rooms such as stores or garages are not attached directly then they still may need to be modelled as shading objects) For Class 2 Apartment Projects, Hero recommends modelling all Common Area spaces including Carparks & Corridors for complete coverage (see Corridor & Carpark Zone Type descriptions below) |
Zones are the Parent object of the Floors , Ceilings & Walls that are contained within them, and also the Zone’s Ceilings Fans & Penetrations
Within the Chenath Simulation Engine, the Zone holds all the information regarding not only the Floors, Ceilings, Walls, Openings & other model Model objects within the space, but also the Internal Heat Gains (such as Appliances, Occupant & Lighting), it’s Heating & Cooling Thermostat Setpoints & Profile, and the operation of Shade & Natural Ventilation features within the Zone. The Heating & Cooling Results of a Simulation are compiled measured at a the Zone level, and it from this Zone Heating & Cooling Result that the Star-Rating is eventually derived from.
...
Zones are created within the Visual View using the Zone Drawing Mode.
Tip |
---|
Roofspace Zones & Subfloor Zones are automatically created by Hero when a Ceiling or Floor |
...
is changed to have a Roofspace or Subfloor Adjacency respectively. |
Selecting
Zones can be Selected using the Select Parent Context-Menu Action ( 🖱 Right-Click
→ Select Parent
) or it’s shortcut (🖱 Double Left-Click
on a child such as Wall, Floor or Ceiling).
...
Property | Description | Edited Within |
---|
Name | The Name of the Zone | Name Column |
---|
Type | The Zone Type such as Bedroom or Living Room or Unconditioned. Zone Type determines the Heating & Cooling Thermostat Setpoints & Profile as well as Internal Heat Gain impacts (see Resources. Info |
---|
See the table below for all NatHERS Zone Types. |
| Type Column |
---|
Dwelling | The Parent Dwellingof the Zone. Can be changed if Zone was initially created within the wrong Dwelling. | Dwelling Column (if >1 Dwelling) |
---|
Volume | The Total Air Volume of the Zone (in m3). Can be Manually overridden Overridden by Users if desired to enter custom Air-Volumes. Volumes are typically automatically Automatically calculated by Hero for Zones. However there are situations where the User may wish to set their own Zone Volume figure due to unusual Zone geometry or other reasons. The Hero Automatic Volume calculations can become less accurate for Non-Rectangular Zones (e.g. Zones with lots of split walls, floating walls and/or raked ceilings). Image Added Info |
---|
The Automatic/Manual Volume Column of the Zone Data-Grid allows Users to toggle between these Hero or User Volume figures. Setting the value Toggle back to Automatic will recalculate the Volume back to Hero’s calculationcalculated value |
| Volume & Volume Automatic Columns |
---|
Air Leakage | Total Air Leakage of all Penetrations within the Zone (in m3/hr) Info |
---|
Note: Currently does not include Simulated Air-leakage from Room & Openings, just Penetrations .(coming soon) |
| Air Leakage Column (hidden by Default) |
---|
...
Hero contains the following Zone Types, many of which are exactly the same as the NatHERS Technical Notes descriptions of Zone Type definitions with several exceptions.
Zone Type | Description |
---|
Kitchen/Living | Examples: Kitchen, Kitchen/Living, Kitchen/Dining Expand |
---|
title | As per NatHERS Technical Notes: |
---|
| “Any room shown on a plan as a kitchen or a kitchen combined with one or more living areas. This zone must include the main kitchen area and may include a lounge, meals or dining area. All dwellings must contain one main kitchen/living zone. There can be no more than one kitchen/living zone. All additional smaller kitchens/kitchenettes within the dwelling must be zoned as another zone type.” |
|
---|
Living | Examples: KitchenLiving, Kitchen/LivingLounge, Kitchen/Dining | LivingDining, Family, Rumpus, Media, Theatre Expand |
---|
title | As per NatHERS Technical Notes |
---|
| “This is the default zoning for internal zones not covered by any other zone type. Daytime zones include studies (without a built-in wardrobe), gymnasiums, internal domestic lifts, indoor pool rooms, saunas, above ground wine cellars, walk-in pantries, storage areas or conditioned outdoor living areas capable of being fully enclosed (i.e. considered within the dwelling envelope). This zone type includes hallways and corridors (either fully enclosed by doors or open to other zones) as they are circulation areas that allow access to other zones. This includes zones such as ensuites or walk-in wardrobes that can be accessed by a hallway or corridor (e.g. a two-way bathroom accessible by both a bedroom and the hallway). This zone type could also include any living, lounge, dining, family, rumpus, media or home theatre room, if they are in addition to the two largest living areas. This zone may be selected when a laundry, WC, bathroom or powder room is not ventilated by a door or window on an external wall.” |
|
---|
Bedroom | Examples: Living, Lounge, Dining, Family, Rumpus, Media, Theatre | BedroomBedroom or Study with Wardrobe Expand |
---|
title | As per NatHERS Technical Notes |
---|
| “Any room shown on the plan as a bedroom, whether or not it has any built-in wardrobes. Bedroom zoning must also be used for a study with either a built-in wardrobe, walk-in wardrobe or attached ensuite. In this case, the ‘study’ becomes a bedroom zone with the built-in wardrobe part of the same zone. A walk-in wardrobe or ensuite is to be zoned as night-time.” |
|
---|
Day Time | Examples: Bedroom or Study with Wardrobe | Day Time | Laundry or WC or Bathroom with No External Window/Door, Study, Hall, Corridor, Store, Pantry Expand |
---|
title | As per NatHERS Technical Notes |
---|
| “This is the default zoning for internal zones not covered by any other zone type. Daytime zones include studies (without a built-in wardrobe), gymnasiums, internal domestic lifts, indoor pool rooms, saunas, above ground wine cellars, walk-in pantries, storage areas or conditioned outdoor living areas capable of being fully enclosed (i.e. considered within the dwelling envelope). This zone type includes hallways and corridors (either fully enclosed by doors or open to other zones) as they are circulation areas that allow access to other zones. This includes zones such as ensuites or walk-in wardrobes that can be accessed by a hallway or corridor (e.g. a two-way bathroom accessible by both a bedroom and the hallway). This zone type could also include any living, lounge, dining, family, rumpus, media or home theatre room, if they are in addition to the two largest living areas. This zone may be selected when a laundry, WC, bathroom or powder room is not ventilated by a door or window on an external wall.” |
|
---|
Night Time | Examples: Laundry or WC or Bathroom with No External Window/Door, Study, Hall, Corridor, Store, Pantry | Night Time | Ensuite, WIR accessed from Bedroom Expand |
---|
title | As per NatHERS Technical Notes |
---|
| “This applies to areas that can only be accessed from a bedroom or from a zone, which itself, is only accessed from a bedroom. These include ensuites, walk-in wardrobes, parent’s retreats and WCs accessed from an ensuite.)” |
|
---|
Unconditioned | Examples: Ensuite, WIR accessed from Bedroom | UnconditionedLaundry or Bathroom or WC or Powder, with External Window/Door Expand |
---|
title | As per NatHERS Technical Notes |
---|
| “Every dwelling must have at least one unconditioned zone. Laundries, bathrooms, airlocks, WCs or powder rooms that have an external wall with at least one or more ventilation openings (window or door). If there are no rooms that fit this description, then the smallest daytime zone must be modelled as an unconditioned zone. An airlock is a small, relatively airtight space that can be modelled as unconditioned space if: - it is located at a dwelling entrance and - has one or more external walls and - has one or more internal walls and - has an external door and - has one or more internal doors, of which, only one opens to a conditioned zone. Where an area labelled as an ‘airlock’ does not meet the above conditions, it is to be modelled as a daytime zone. Underground cellars may also be considered an unconditioned zone.” |
|
---|
Unconditioned Garage | Examples: Laundry or Bathroom or WC or Powder, with External Window/Door Unconditioned Garage Expand |
---|
title | As per NatHERS Technical Notes |
---|
| “Where a garage is shown on the documentation as attached to the dwelling, and does not have any heating or cooling indicated.” |
|
---|
Conditioned Garage | Examples: Unconditioned Garage | Conditioned GarageGarage with Heating and/or Cooling Expand |
---|
title | As per NatHERS Technical Notes |
---|
| “This zone type only applies when a garage has heating ducts, hydronic heating elements or air conditioners.” | Examples: Garage with Heating and/or Cooling |
---|
Corridor (Class 2) | Note |
---|
Hero models all Class 2 Corridors (whether they are Unglazed or Glazed as per NatHERS Definitions) as a single “Corridor” Zone Type to minimise user confusion & simplify Model creation. |
Hero decides automatically (based on whether the Corridor Zone has Glazing) as to whether to Simulate the Zone within Chenath as a Special Chenath “Glazed Corridor” Zone, or as Neighbouring Adjacency |
---|
Carpark (Class 2) | Examples: Basement, shared carpark (Class 2 or 4 only) Expand |
---|
title | As per NatHERS Technical Notes |
---|
| “Where there is a shared carpark underneath an apartment, and the carpark is equal to or greater than 50 per cent closed from the outdoor air, then the area directly under the apartment must be zoned as ‘shared basement carpark’. Where a carpark under the apartment is greater than 50 per cent open to the outdoor air then this zone must be modelled as ‘above outdoor air’. This zone type must only be used in Class 2 and 4 dwellings. (More information available in Table 3). This zone type must not be used when Class 2 dwellings have individual garages.” | Examples: Basement, shared carpark (Class 2 or 4 only) |
---|
Void | The Void Zone Type is used to model a special situation where a Zone resides over Multiple Levels. The Void Zone should be the Upper Zone. Modelling a Zone as a Void means that all of it’s child objects such as Walls, Ceilings & Openings are modelled as a Single Zone within Chenath. Tip |
---|
Note a Void Zone does not need a Hole across the entirety of it’s Floor, this is assumed automatically by Hero (though you can if you’d like, though it will have identical effects). |
|
---|
Special Zones | Description |
---|
Roofspace Zone | A Roofspace Zone automatically created by a Ceiling with a Roofspace Adjacency. Zone Type cannot be changed within Zone Data-Grid Info |
---|
For further details see the below Roofspace Zone section |
|
---|
Subfloor Zone | A Subfloor Zone automatically created by a Floor with a Subfloor Adjacency. Zone Type cannot be changed within Zone Data-Grid Info |
---|
For further details see the below Subfloor Zone section |
|
---|
SPECIAL ZONES
ROOFSPACE ZONES
...
ROOFSPACE ZONES
A Roofspace Zone is automatically created by Hero whenever a Ceilings is of an Attic Type (which sets the Adjacency Type of the Ceiling to Roofspace).
This Roofspace Zone is modelled as a separate Zone within Chenath to account for the complex interactions of radiation, ventilation & convection within such a space.
Roofspace Zones have two additional attributes beyond normal Zones that users should be aware of: a Shape & a Soffit Floor (and in future customisable Roofspace Walls)
Roofspace Shape
A Roofspace Zone can have several Shapes applied to it to approximate the volume and roof layout of the Zone, including:
Roofspace Shape | Description |
---|
Hip Roof | A Standard Widget Connector |
---|
width | 200 |
---|
url | https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjaq9DpyJbqAhUXeisKHUwMD8sQFjAAegQIAhAB&url=https%3A%2F%2Fen.wikipedia.org%2Fwiki%2FHip_roof&usg=AOvVaw0R5ZXEUNiGUbk8IpWXhlwR |
---|
height | 200 |
---|
|
|
---|
Gable (Ridge-Line N to S) | |
---|
Gable (Ridge-Line W to E) | |
---|
Mono-Pitch | |
---|
Roofspace Walls
Roofspace Soffit Floor
SUBFLOOR ZONES
Subfloor Walls