...
Zones are created by entering the Zone Drawing-Mode using the Left Toolbar create zone button or ⌨ Z keyboard shortcut.
Zones can be drawn in several different ways through the Rectangle or Line submodesSub-Modes.
...
Click the Sub-Mode button on the drawing-mode guide-box or use the ⌨ Tilde ` key to toggle between submodes Sub-Modes as required for each room.
Rectangle Sub-Mode
🖱 Left-Click to begin creating a zone.
The next 🖱 Left-Click will finish zone creation.
...
Alternatively enter Manual Dimensions by typing the width and depth of the zone in millimetres and hit enter to create.
Right-click will reset the first point's location and a 2nd right-click (or the Escape key) will exit the drawing mode.In the
Line sub-mode, left-click Sub-Mode
🖱 Left-Click each point of the zone Zone.
Complete the zone Zone by double🖱 Double Left-clicking Click on the last created point of the zone, or 🖱 click back at the origin.
You may hold shift ⌨ Shift to draw lines in straight horizontal ↔ or vertical @vertical directions. Right-click to remove points, and if all points have been removed, a subsequent right-click will exit zone drawing-mode.
...