Holes
- Hero Software
A Hole is the name Hero gives to Horizontal Openings between two Zones. The most common application for using Holes within a Project is to model a Stairwell or similar opening between two Zones.
The addition of a Hole between the two Zones ensures that the Airflow & Ventilation effects are accounted for in the Simulation.
Holes vs Void Zones - When to Use
Holes are used to connect two different Zones through a ventilation opening (typically via a Stairwell or similar).
A Void Zone Type (see Zones) is used to model the upper portion of a single Zone that projects over two Levels.
HOLES WITHIN THE VISUAL VIEW
Creation
Holes are created using the Hole Drawing mode (Skylight & Hole Drawing Mode).
Holes are created on the parent Floor that they penetrate (i.e. not on Ceilings), and must have an Adjacent Zone below them, otherwise an Alert message will be raised and Simulation will not be able to proceed. An Alert will also be raised if a Hole is entered on a Floor with a Zone from a different Dwelling below it, Holes can only be modelled between Zones of the same Dwelling.
Selecting
Holes are shown on the Visual View and can be selected as per normal objects. Holes are added to the Floor Data-Grid as a child row under the Parent Floor and can be likewise selected there.
You can also use the Visual View’s Select Parent context-menu action for a Hole (or it’s Double Left-Click mouse shortcut). In this case, the action selects the parent Floor of the Hole.
Deleting
Holes can be Deleted as per normal model objects using the Delete keyboard shortcut, or Right-Click Context-menu action Delete or via the Data-Grid’s Delete button. Points can be deleted off the Hole polygon shape by Right-Clicking the Point and selecting Delete Point.
Moving Holes
Holes can be moved in the Visual View by selecting them and then Dragging them into their position.
You can also Drag the Points of a Hole to move that Point and extend or shrink the length.
Holes cannot be moved outside the bounds of the Zone
You can move a Hole or a Hole Point in a straight or direction by holding ⌨ Shift.
Adding Points
Points can be added to a Hole by Right-clicking the Hole near it’s edge and selecting the Add PointContext Menu action.
HOLES WITHIN THE DATA-GRID
Holes are contained within the Floor Data-Grid section, as a child object of their Parent Floor
Property | Description | Edited Within |
|---|---|---|
Name | The name of the Hole | Floor Data-Grid Name Column |
Area | Total Area of Hole in Square Metres | Not Editable within Data-Grid |